Fender Pickups Guide
Fender has made pickups since the 50´s. but did not sell them individually until early 90s. If you are not fuzzy about boutique pickups, Fender's own does the job well.
Keep in mind that there are also hand-wound Custom Shop versions of some of these available. They are usually made for Custom Shop guitars and any on sale on Ebay or elsewhere are 90% certain taken from CS guitars. The remaining 10% comes from Fender direct as they sometimes issue out a limited amount of Custom Shop pickup for sale on their website. CS version usually have gold marker date & signature + an COA and they have a hefty price tag.
Pure Vintage series are aiming for period correctness. similar bobbin, wire, magnets etc as the original pickups. Made in Ensenada Mexico
Custom Shop series are machine wound in USA. Aiming to bring some of the hand-wound CS spec models for world wide retail at lower cost.
The Standard series are machine wound in Ensenada. A mix of both full price and budget friendly pickups, and comes in various bobbin and wire materials.
Noiseless: Fender used Lace Sensors back in the day. They eventually developed their own line and introduced the first model for sale in 1998
Handwound Limited Retail: A small selection of Custom Shop handwound pickups that was released for sale in limited amount.
-----
When looking for pickups, Inductance is equally important as ohm readings on a pickup. Higher inductance means heavier string pull. Also factor in magnets used in pickups. When you sum Ohm+Henry+Magnet together they give you a good indication to how vintage or how hot they will be. But not necessarily how they will sound. What type of wire wound has also a small affect for the sound of them. They are either Enamel or Formvar wire or the newer Polysol coated wires.
Magnets: Alnico 2: Second weakest - Alnico 3: weakest - Alnico 4: second strongest - Alnico 5: Strongest
Pure Vintage Series
Box Limited Edition
Box Specs
Pickups with Rounded covers
Box Limited Edition
Pure Vintage '54 (Ltd Edition)
STYLE: Low Output Pickups
DC: Around 5.8k on each
INDUCTANCE: 2.6 Henries
RWRP: No
MAGNETS: Beveled Alnico 3 | Staggered
FLATWORK: Black volcanised Fibre
WIRE: Heavy Formvar
LEADS: Cloth wire
COVERS: Repro of Beveled bakelite in white Polystyrene plastic.
Markings: "54" written in silver sharpie all three pu´s.
Model# 099-2244-000
Produced in a limited run of 1,954 sets in 2006 during their 60th anniversary. These sets (sold out long ago). Fetches higher price second hand. OCGW has a small stock of them as of 2023
Very Buddy Holly-ish tone of these. Low wound, Great bright glassy cleans if you desire it. Similar to Duncan SSL-1, Gives you all the quack you want. Not the strongest bite on bridge, but they were not made to be.
Comes with 50´s high beveled rounded covers that imitates the early bakelite covers that is hard to find on their own in plastic.
Custom Shop Series
Old Box
AY Abigail Signed. But not wound by her
Custom Shop '69
STYLE: Low Output Pickups
DC: Around 5.4k on each
INDUCTANCE: 2.1 Henries
RWRP: No
MAGNETS: Non Beveled Alnico 5 | Staggered
FLATWORK: Grey Fibre Bobbins
WIRE: Enamel
LEADS: Cloth
COVER: White
Markings: Signed: AY+Date in blue/black pen until 2011. After that they only had silver Custom Shop stickers
The CS69 is the lowest vintage output pickup and has a glassy clear top end, Scooped mids and punchy lows. Sounds absolutely best on clean. Probably the first model in this line as the early ones up until 2011 was dated and signed (but not wound) by Abigail Ybarra. Raise them high enough and they are getting close to Seymour Duncan SSL-1. Needs plenty gain to break them into distortion Think SRV on these ones if you aim for that. Suitable for Pop and jazz if you play them low and clean. Versatile pickups that find favours in som many players but they are NOT for everyone.
Standard Retail Series
Fender Tex Mex
STYLE: Hot Output Pickups
DC: Neck: 6.5k | Middle: 6.4k | Bridge: 7.4k
INDUCTANCE: Neck: 2.75h | Middle: 2.75h | Bridge: 3.7
RWRP: Yes
MAGNETS: Non-Beveled Alnico 5 | Staggered
WIRE: Polysol Coated Wire
LEADS: PVC coated wire
FLATWORK: Plastic mold bobbins
COVERS: White
Markings: Written in white : B:50657 M: 50658 N:50659
These are a flatter response set of pickups. Must not be compared to Texas Specials as they are vastly different but aiming for the same performance with the overwound Bridge.
Glassy, bright and sparkly vintage tones on the cheap. With a high output bridge for rowdy tones. Probably the best affordable upgrade of pickups Fender has in production. Featured on Jimmy Vaughan Sign Strat.
Noiseless Series
Old Boxart
Vintage Noiseless (Gen. 1)
STYLE: Vintage Low Output
DC: 9.8k On All
INDUCTANCE: 3.0H on All
MAGNETS: Beveled Alnico 2 Staggered
WIRE: Polysol Magnet Wire
LEADS: PVC coated wire
COVERS: Aged White
MARKINGS: Pickups taken from guitars are unmarked. Retail can have markings. White pen 766 767 & 768. Etched numbers: 05526 but can vary.
The 1st gen. noisless came in 1998 after several years of Fender using Lace Sensors.
These was introduced later as Vintage Noiseless. and are still in production.
These are perhaps the darkest sounding of them. Warm but not quite stratty.
Telecaster Pickups
Old Box
Fender Pure Vintage '52
STYLE: Low Vintage Output
DC: Neck: 7.2k | Bridge: 6.6k
INDUCTANCE: Neck 2.4h | Bridge: 3.8h
MAGNETS: Alnico 3
WIRE: Enamel
Polepieces: Flush mount
Bobbins: Fiber
Wire: Cloth wire
Dubbed more or less as the original sound. This is purely a vintage common spec pickups for those who not craving for anything special. Often compared up with Nocaster 51´s. These are similar. Low bottom end but with slightly more brighter neck pickup. Apparently these were revoiced in 2012. The earlier was warmer in sound.
Handwound Custom Shop Limited Retail
Custom Shop 60/63
STYLE: Vintage Output
DC: Neck: 6.20k |Middle: 6.45k | Bridge: 6.47k
INDUCTANCE:?
MAGNETS: Alnico 5
RWRP: Yes
WIRE: Formvar
Polepieces: Staggered, Non Beveled
Bobbins: Black Bobbins Fiber
Wire: Cloth wire
Model #: 0992330000
Throaty sound is what knocks around when trying to classify these.
Released in few quantities in 2020-2021-ish
Model | Output Neck | Output Middle | Output Bridge | Wire | Magnets | RWRP |
|---|---|---|---|---|---|---|
Custom Shop Troposphere | 5.4k / ?H | 5.5k / ?H | 5.4k / ?H | Formvar & Enamel | Alnico 5 | Yes |
Custom Shop Tomatillo | 6.0k / ?H | 6.0k / ?H | 6.27k / ?H | Formvar | Alnico 2 | Yes |
Custom Shop Ancho Poblano | 6.25k / ?H | 6.47k / ?H | 6.27k / ?H | Formvar & Enamel | Alnico 3 & 5 | Yes |
Custom Shop '60/'63 | 6.2k / ?H | 6.45k / ?H | 6.47k / ?H | Formvar | Alnico 5 | Yes |
ML Ultra Noiseless | 9,0k / 2.7H | 9.8k / 2.9H | 11.1k / 4.0H | Polysol Formvar | Alnico 5 | |
Stratocaster CuNiFe | 9,6k / 3.8H | 10.0k / 4.2H | 10.5k / 4.6H | Formvar | Cobalt Chrome | Yes |
Fender Super 55 | 12.6k / 2.9H | 12.6k / 2.9H | 14.7k / 3.2H | Formvar | Alnico 5 | |
Ultra Noiseless Hot | 12.0k /3.75H | 12.0k /3.75H | 14.2k /6.6H | Polysol Formvar | Alnico 5 | |
Ultra Noiseless Vintage | Various | Various | Various | Polysol Formvar | Alnico 5 | |
Noiseless Gen.4 | 10.3k /3.2H | 10.3k /3.2H | 10.3k /3.6H | ? | Alnico 5 | |
Hot Noiseless (Jeff Beck) | 10.4k /3.5H | 10.4k /3.5H | 10.4k /3.5H | Polysol Formvar | Ceramic | |
N3 Noiseless (Gen.3) | 6.8k / 3.0H | 6.8k / 3.0H | 6.8k / 3.0H | Formvar | Mixed | |
Noiseless Gen. 2 (SCN) | 6.5k / 2.4H | 9,8k / 3.0H | 11.4k / 4.0H | ? | Samarium Cobalt | |
Vintage Noiseless (Gen.1) | 9,8k / 3.0H | 6.6k / 2.3H | 9,8k / 3.0H | Polysol Formvar | Alnico 2 | |
Vintera 60's Vintage | 5.7k / 2.3H | 5.95k / 2.6H | 5.95k / 2.75H | Enamel | Alnico 5 | Yes |
Vintera 60's Vintage | 5.7k / 2.3H | 5.95k / 2.6H | 5.95k / 2.75H | Enamel | Alnico 5 | Yes |
Vintera 50's Modified | 6.0k / 2.5H | 6.1k / 2.5H | 6.5k / 2.5H | Formvar | Alnico 5 | Yes |
Vintera 50's Vintage | 5.5k / 2.4H | 5.9k / 2.5H | 6.0k / 2.6H | Formvar | Alnico 5 | Yes |
Eric Johnson Signature | 5.9k / 2.8H | 6.4k / 2.8H | 6.8k / 3.0H | Formvar | Alnico 3 & 5 | Yes |
Fender Deluxe Drive | 10,6k / 3.5H | 12,0k / 4.3H | 12,0k / 4.3H | Polysol Formvar | Alnico 3 | Yes |
Fender '57/'62 | 5,6k / 2.4H | 5,6k / 2.4H | 5,6k / 2.4H | Formvar | Alnico 5 | No |
Fender V-Mod | 6.4k / 2.76H | 6.7k / 2.74H | 6.7k / 2.8H | ? | Mixed | Yes |
Fender Yosemite | 7.8k / 3.2H | 8.5k / 3.5H | 8.9k / 3.9H | Plain Enamel | Alnico 5 & 2 | Yes |
Fender Tex Mex | 6.5k / 2.75H | 6.4k / 2.75H | 7.4k / 3.7H | Polysol Formvar | Alnico 5 | Yes |
CS Texas Special | 6.2k / 2.4H | 6.5k / 2.6H | 6.7k / 3.6H | Enamel | Alnico 5 | Yes |
CS '54 | 5,9k / 2.4H | 5,9k / 2.4H | 6.5k / 2.75H | Formvar | Alnico 5 | No |
CS Fat 60's | 6.7k / 2.8H | 6.7k / 2.8H | 6.7k / 2.8H | Formvar | Alnico 2 | Yes |
CS Fat 50's | 6.0k / 2.4H | 6.3k / 2.7H | 6.2k / 2.8H | Formvar | Alnico 5 | Yes |
CS 69 | 5.4k / 2.1H | 5.4k / 2.1H | 5.4k / 2.1H | Plain Enamel | Alnico 5 | No |
Pure Vintage '54 (70th Anniv.) | 5.8k / 2.6H | 5.8k / 2.6H | 5.8k / 2.6H | Formvar | Alnico 3 | No |
Pure Vintage '73 | 6.1k / 2.8H | 6.1k / 2.8H | 6.7k / 2.8H | Polysol Formvar | Alnico 5 | Yes |
Pure Vintage '61 | 5,9k / 2.3H | 5,9k / 2.3H | 5,9k / 2.3H | Formvar | Alnico 5 | No |
Pure Vintage '57 | 5.9k / 2.5H | 5.9k / 2.5H | 5.9k / 2.5H | Polysol Formvar | Alnico 5 | No |
Pure Vintage 65 | 6.0k / 2.6H | 6.0k / 2.6H | 6.0k / 2.6H | Enamel | Alnico 5 | No |
Pure Vintage '59 | 5.8k / 2.6H | 5.8k / 2.6H | 5.8k / 2.6H | Formvar | Alnico 5 | No |
Pure Vintage '57/'62 RWRP | 5.6k / 3.0H | 5.6k / 3.0H | 5.6k / 3.0H | Formvar | Alnico 5 | Yes |
Pure Vintage '56 | 6.0k / 2.6H | 5,9k / 2.6H | 5,9k / 2.6H | Formvar | Alnico 3 | No |
Pure Vintage '54 | 5.8k / 2.6H | 5.8k / 2.6H | 5.8k / 2.6H | Heavy Formvar | Alnico 3 | No |